Asphalts

Test method for preparing asphalt mixing specimens using Marshall equipment
Test method for stability and Marshall flow of asphalt mixtures.
  • INTE C10: 2006 (04-01-10)
  • ASTM D6926-16
  • INTE C11: 2006 (04-01-11)
  • ASTM D6927-15
  • AASHTO T245-13
Test method to determine the theoretical maximum specific gravity and the density of asphalt mixtures for pavements.
  • INTE C3: 2005 (04-01-03)
  • ASTM D2041-11
  • AASHTO T209-99
Test method for the determination of the gross specific gravity of compacted asphalt mixtures, using the dry saturated surface method.
  • INTE C1: 2004 (04-01-01)
  • ASTM D2726-17
  • AASHTO T166-00
Test method to determine the asphalt content of hot asphalt mixtures (MAC) by the ignition method.
  • INTE C9: 2006 (04-01-09)
  • ASTM D6307-16
  • AASHTO T 308-01
Humidity content of the hot asphalt mixture (HMA) by the kiln method
  • AASHTO T 329
Test method for preparing asphalt mixing specimens using Marshall equipment. Test method for stability and Marshall flow of asphalt mixtures
  • INTE 04-01-10
  • ASTM D 6926
  • INTE 04-01-11
  • ASTM D 6927
  • AASHTO T 245
Test method for the softening point of bitumen (appliances, ring and ball)
  • ASTM D 36
Test method to determine the asphalt content of hot asphalt mixtures (MAC) by means of the ignition method
  • INTE 04-01-09
  • ASTM D 6307
  • AASHTO T 308
Test method for quantitative extraction of asphalt in asphalt mixtures
  • INTE 04-01-08, Method B
  • ASTM D 2172, Method B
  • AASHTO T 164, Method B
Test method for quantitative extraction of asphalt in asphalt mixtures
  • INTE C8: 2005 (04-01-08)
  • ASTM D2172-17
  • AASHTO T164-01
Test method to determine the percentage of air voids of dense and open asphalt mixtures for pavements.
  • INTE C4: 2005 (04-01-04)
  • ASTM D3203-17
  • AASHTO T269-97
Test method to determine the compressive strength of asphalt mixtures.
  • INTE C6: 2005 (04-01-06)
  • ASTM D1074-17
  • AASHTO T167-02
Test method to determine the effect of water on the compressive strength of compacted asphalt mixtures.
  • INTE C7: 2005 (04-01-07)
  • ASTM D1075-11
  • AASHTO T165-02
Test method for the determination of the gross specific gravity of compacted asphalt mixtures, using the dry saturated surface method
  • INTE 04-01-01
  • ASTM D 2726
  • AASHTO T 166
Test method for the granulometric analysis of extracted aggregate
  • INTE 04-01-13
  • ASTM D 5444
  • AASHTO T 30
Test method to determine the compressive strength of asphalt mixtures
  • INTE 04-01-06
  • ASTM D 1074
  • AASHTO T-167
Test method to determine the effect of water on the compressive strength of compacted asphalt mixtures
  • INTE 04-01-07
  • ASTM D 1075
  • AASHTO T-165
Test method to determine the theoretical maximum specific gravity and the density of asphalt mixtures for pavements
  • INTE 04-01-03
  • ASTM D 2041
  • AASHTO T 209
Test method for the preparation and determination of the relative density of specimens of asphalt mix by means of the superpave rotary compactor
  • ASTM D 6925
  • AASHTO T 312
Test method to determine resistance to moisture induced damage in compacted asphalt mixtures. (Indirect diametral tension retained)
  • INTE C5: 2005 (04-01-05)
  • AASHTO T283-02
Test method for the determination of gross maximum specific gravity in compacted asphalt mixtures using paraffin-coated test specimens
  • INTE C2: 2004 (04-01-02)
  • AASHO T275-17
Test method for the preparation and determination of the relative density of specimens of asphalt mix by means of the Superpave rotary compactor.
  • ASTM D6925-15
  • AASHTO T312-11
Test method for the softening point of bitumen (appliances, ring and ball)
  • ASTM D36-14
Test method for ductility and elastic recovery of asphalt materials with the ductilimer.
  • ASTM D113-17
  • ASTM D6084-18
  • AASHTO T301-13
Humidity content of the hot asphalt mixture (HMA) by the kiln method
  • AASHTO T 329
Test method for ductility and elastic recovery of asphalt materials with the ductilimeter
  • ASTM D 113
  • ASTM D 6048
  • AASHTO T 301
Standard test method for the determination of the international regularity index (IRI) by an inertial profilometer
  • ASTM E 950
  • AASHTO R-56 and R-57
Test method for the determination of the International Regularity Index (IRI) by static level method
  • ASTM E 1364
  • AASHTO R-41
Test method to determine the resistance to damage induced by moisture in compacted asphalt mixtures (indirect diametral tension retained)
  • INT 04-01-05
  • AASHTO T 283
Test method to determine the percentage of air voids of dense and open asphalt mixtures for pavements
  • INTE-04-01-04
  • ASTM D 3203
  • AASHTO T-269
Test method for the determination of gross maximum specific gravity in compacted asphalt mixtures using paraffin-coated test specimens
  • INTE-04-01-02
  • AASHO T 275
See Acreditation

Quality Control

See More

Geotechnics

See More

Consultancy

See More

Inspection

See More
Design by: